EL9184, EL9188, EL9189 | HD EtherCAT Terminals, 16-channel potential distribution

The potential distribution terminals EL9188 and EL9189 provide 16 terminal points with a potential and enable the voltage to be picked up without further bus terminal blocks or wiring.

The EL9184 provides the potential of the 24 V DC contact at 8 terminal points and the potential of the 0 V contact at 8 terminal points.

The conductors can be connected without tools in the case of solid wires using a direct plug-in technique.

The HD EtherCAT Terminals (High Density) with increased packing density feature 16 connection points in the housing of a 12 mm terminal block.

Technical data	EL9184	EL9188	EL9189
Technology	potential distribution terminal
Nominal voltage	≤ 60 V
Current load	≤ 10 A
Integrated fine-wire fuse	–
Diagnostics in the process image	–
Power LED	–
Defect LED	–
Reported to E-bus	–
PE contact	–
Number of outputs	e.g.: 8 x 24 V contact, 8 x 0 V contact	e.g.: 16 x 24 V contact	e.g.: 16 x 0 V contact
Shield connection	–
Renewed infeed	yes
Current consumption E-bus	–
Bit width in the process image	0
Electrical connection to DIN rail	–
Electrical isolation	–
Housing width in mm	12
Conductor types	solid wire, stranded wire and ferrule
Conductor connection	solid wire conductors: direct plug-in technique; stranded wire conductors and ferrules: spring actuation by screwdriver
Rated cross-section	solid wire: 0.08…1.5 mm²; stranded wire: 0.25…1.5 mm²; ferrule: 0.14…0.75 mm²
Special features	direct plug-in technique
Weight	approx. 60 g
Side by side mounting on EtherCAT Terminals with power contact	yes, left without PE
Side by side mounting on EtherCAT Terminals without power contact	–	yes	yes
Approvals	CE, UL, Ex