Accessories
Accessories
Motor cables ALxxxx/AMxxxx to AX2000
| Ordering information | ZK4000-21y1-2zzz | Motor cable with 1.5 mm² cross-cut |
|---|---|
| ZK4000-2111-2050 | motor cable, assembled at both ends for AX2000 Servo Drive, 4 x 1.5 mm² + 2 x 1 mm², l = 5 m |
| ZK4000-2111-2100 | motor cable, assembled at both ends for AX2000 Servo Drive, 4 x 1.5 mm² + 2 x 1 mm², l = 10 m |
| ZK4000-2111-2150 | motor cable, assembled at both ends for AX2000 Servo Drive, 4 x 1.5 mm² + 2 x 1 mm², l = 15 m |
| ZK4000-2111-2200 | motor cable, assembled at both ends for AX2000 Servo Drive, 4 x 1.5 mm² + 2 x 1 mm², l = 20 m |
| ZK4000-2111-2250 | motor cable, assembled at both ends for AX2000 Servo Drive, 4 x 1.5 mm² + 2 x 1 mm², l = 25 m |
| ZK4000-2111-2300 | motor cable, assembled at both ends for AX2000 Servo Drive, 4 x 1.5 mm² + 2 x 1 mm², l = 30 m |
| ZK4000-2101-2zzz | motor cable, not assembled, 4 x 1.5 mm² + 2 x 1 mm², zzz = ordering indication of the length of material in decimetres, e.g. ZK4000-2101-2100 = 10 metres |
| Ordering information | ZK4000-21y2-2zzz | Motor cable with 2.5 mm² cross-cut (as of servomotor AM297K) |
|---|---|
| ZK4000-2112-2050 | motor cable, assembled at both ends for AX2000 Servo Drive, 4 x 2.5 mm² + 2 x 1 mm², l = 5 m |
| ZK4000-2112-2100 | motor cable, assembled at both ends for AX2000 Servo Drive, 4 x 2.5 mm² + 2 x 1 mm², l = 10 m |
| ZK4000-2112-2150 | motor cable, assembled at both ends for AX2000 Servo Drive, 4 x 2.5 mm² + 2 x 1 mm², l = 15 m |
| ZK4000-2112-2200 | motor cable, assembled at both ends for AX2000 Servo Drive, 4 x 2.5 mm² + 2 x 1 mm², l = 20 m |
| ZK4000-2112-2250 | motor cable, assembled at both ends for AX2000 Servo Drive, 4 x 2.5 mm² + 2 x 1 mm², l = 25 m |
| ZK4000-2112-2300 | motor cable, assembled at both ends for AX2000 Servo Drive, 4 x 2.5 mm² + 2 x 1 mm², l = 30 m |
| ZK4000-2102-2zzz | motor cable, not assembled, 4 x 2.5 + 2 x 1 mm², zzz = ordering indication of the length of material in decimetres, e.g. ZK4000-2102-2100 = 10 metres |
Note: With motor cables > 25 m the motor choke AX2090-MD20 is required! All cables are UL and CSA listed, and suitable as trailing cable (10 million bending cycles), special length on request, maximum length = 100 metres.
Motor cables ALxxxx/AMxxxx to AX2500
| Ordering information | ZK4000-27y1-2zzz | Motor cable with 1.0 mm² cross-cut |
|---|---|
| ZK4000-2711-2050 | motor cable, assembled at both ends for AX2500 Servo Drive, 4 x 1.0 + 2 x 1 mm², l = 5 m |
| ZK4000-2711-2100 | motor cable, assembled at both ends for AX2500 Servo Drive, 4 x 1.0 + 2 x 1 mm², l = 10 m |
| ZK4000-2711-2150 | motor cable, assembled at both ends for AX2500 Servo Drive, 4 x 1.0 + 2 x 1 mm², l = 15 m |
| ZK4000-2711-2200 | motor cable, assembled at both ends for AX2500 Servo Drive, 4 x 1.0 + 2 x 1 mm², l = 20 m |
| ZK4000-2711-2250 | motor cable, assembled at both ends for AX2500 Servo Drive, 4 x 1.0 + 2 x 1 mm², l = 25 m |
| ZK4000-2701-2zzz | motor cable, not assembled, 4 x 1.0 + 2 x 1 mm², zzz = ordering indication of the length of material in decimetres, e.g. ZK4000-2701-2100 = 10 metres |
Note: With motor cables > 25 m the motor choke AX2090-MD20 is required! All cables are UL and CSA listed, and suitable as trailing cable (10 million bending cycles), special length on request, maximum length = 100 metres.
Resolver cables AMxxxx to AX2000/AX2500
| Ordering information | ZK4000-22yy-2zzz | Resolver cables |
|---|---|
| ZK4000-2210-2050 | resolver cable, assembled at both ends, 4 x 2 x 0.25 mm², l = 5 m |
| ZK4000-2210-2100 | resolver cable, assembled at both ends, 4 x 2 x 0.25 mm², l = 10 m |
| ZK4000-2210-2150 | resolver cable, assembled at both ends, 4 x 2 x 0.25 mm², l = 15 m |
| ZK4000-2210-2200 | resolver cable, assembled at both ends, 4 x 2 x 0.25 mm², l = 20 m |
| ZK4000-2210-2250 | resolver cable, assembled at both ends, 4 x 2 x 0.25 mm², l = 25 m |
| ZK4000-2210-2300 | resolver cable, assembled at both ends, 4 x 2 x 0.25 mm², l = 30 m |
| ZK4000-2200-2zzz | resolver cable, not assembled, 4 x 2 x 0.25 mm², zzz = ordering indication of the length of material in decimetres, e.g. ZK4000-2200-2100 = 10 metres |
Note: All cables have UL and CSA approval, suitable for use in trailing cables with 10 million bending cycles, special lengths on request, the maximum cable length is 100 metres.
Encoder cables AM2xxxx/ALxxxx to AX2000/AX2500
| Ordering information | ZK4000-26yy-2zzz | Feedback cable |
|---|---|
| ZK4000-2610-2050 | encoder cable, assembled at controller end, 8 x 2 x 0.14 mm², l = 5 m |
| ZK4000-2610-2100 | encoder cable, assembled at controller end, 8 x 2 x 0.14 mm², l = 10 m |
| ZK4000-2610-2150 | encoder cable, assembled at controller end, 8 x 2 x 0.14 mm², l = 15 m |
| ZK4000-2610-2200 | encoder cable, assembled at controller end, 8 x 2 x 0.14 mm², l = 20 m |
| ZK4000-2610-2250 | encoder cable, assembled at controller end, 8 x 2 x 0.14 mm², l = 25 m |
| ZK4000-2610-2300 | encoder cable, assembled at controller end, 8 x 2 x 0.14 mm², l = 30 m |
| ZK4000-2600-2zzz | encoder cable, not assembled, 8 x 2 x 0.14 mm² zzz = ordering indication of the length of material in decimetres, e.g. ZK4000-2400-2100 = 10 metres |
Note: All cables have UL and CSA approval, suitable for use in trailing cables with 10 million bending cycles, special lengths on request, the maximum cable length is 50 metres.
Encoder cables for Linear Servomotors ALxxxx*
| Ordering information | ZK4000-24yy-2zzz | Feedback cable |
|---|---|
| ZK4000-2410-2050 | encoder cable, assembled at controller end, 8 x 2 x 0.14 mm², l = 5 m |
| ZK4000-2410-2100 | encoder cable, assembled at controller end, 8 x 2 x 0.14 mm², l = 10 m |
| ZK4000-2410-2150 | encoder cable, assembled at controller end, 8 x 2 x 0.14 mm², l = 15 m |
| ZK4000-2410-2200 | encoder cable, assembled at controller end, 8 x 2 x 0.14 mm², l = 20 m |
| ZK4000-2410-2250 | encoder cable, assembled at controller end, 8 x 2 x 0.14 mm², l = 25 m |
| ZK4000-2410-2300 | encoder cable, assembled at controller end, 8 x 2 x 0.14 mm², l = 30 m |
| ZK4000-2400-2zzz | encoder cable, not assembled, 8 x 2 x 0.14 mm², zzz = ordering indication of the length of material in decimetres, e.g. ZK4000-2400-2100 = 10 metres |
*Only necessary if no connector box is used and encoders from other manufacturers are used.
Note: All cables have UL and CSA approval, suitable for use in trailing cables with 10 million bending cycles, special lengths on request, the maximum cable length is 50 metres.
Thermal protection cables ALxxxx* to AX2000/AX2500
| Ordering information | ZK4000-25yy-2zzz | Thermal protection cables |
|---|---|
| ZK4000-2510-2050 | thermal protection cable, assembled at both ends, 4 x 0.14 mm², l = 5 m |
| ZK4000-2510-2100 | thermal protection cable, assembled at both ends, 4 x 0.14 mm², l = 10 m |
| ZK4000-2510-2150 | thermal protection cable, assembled at both ends, 4 x 0.14 mm², l = 15 m |
| ZK4000-2510-2200 | thermal protection cable, assembled at both ends, 4 x 0.14 mm², l = 20 m |
| ZK4000-2510-2250 | thermal protection cable, assembled at both ends, 4 x 0.14 mm², l = 25 m |
| ZK4000-2510-2300 | thermal protection cable, assembled at both ends, 4 x 0.14 mm², l = 30 m |
| ZK4000-2500-2zzz | thermal protection cable, not assembled, 4 x 2 x 0.14 mm², zzz = ordering indication of the length of material in decimetres, e.g. ZK4000-2500-2100 = 10 metres |
*Only necessary if no connector box is used.
Note: All cables have UL and CSA approval, suitable for use in trailing cables with 10 million bending cycles, special lengths on request, the maximum cable length is 50 metres.
Interface cables for AX2000/AX2500
| Ordering information | ZK4000-230y-zzzz | Interface cables |
|---|---|
| ZK4000-2300-0030 | interface cable PC/Servo Drive AX2000/AX2500 with 9-pin PC connector, including adapter D-sub 25-pin on D-sub 9-pin, length 3 metres |
| ZK4000-2300-0050 | interface cable PC/Servo Drive AX2000/AX2500 with 9-pin PC connector, including adapter D-sub 25-pin on D-sub 9-pin, length 5 metres |
Connectors for Servo Drive AX2000
| Ordering information | ZS4000-200y | Connectors |
|---|---|
| ZS4000-2000 | mating connector, mains (X0-A), part of the delivery |
| ZS4000-2001 | mating connector, mains (X0-B), part of the delivery |
| ZS4000-2002 | connector (male), resolver (X2) D-sub, 9-pin, with housing |
| ZS4000-2003 | mating connector, I/O (X3), part of the delivery |
| ZS4000-2004 | mating connector, 24 V (X4), part of the delivery |
| ZS4000-2005 | EMC-connector (female), ROD/SSI (X5), PC/CAN (X6), D-Sub, 9-pin, with housing |
| ZS4000-2006 | EMC-connector (male), encoder (X1), 15-pin, with housing |
| ZS4000-2007 | mating connector, DC-Link (X7), part of the delivery |
| ZS4000-2008 | mating connector, ballast resistor (X8), part of the delivery |
| ZS4000-2009 | mating connector, motor (X9), kit |
Connectors for Servo Drive AX2500
| Ordering information | ZS4000-25yy | Connectors |
|---|---|
| ZS4000-2504 | mating connector, power supply (X0) |
| ZS4000-2501 | mating connector, BTB (X1) |
| ZS4000-2503 | mating connector, I/O (X3) |
| ZS4000-2500 | mating connector, motor (X6) |
Connectors for Servomotors AMxxxx, ALxxxx and cables
| Ordering information | ZS4000-20yy | Connectors |
|---|---|
| ZS4000-2010 | EMC power connector for servo cable (counterpart for motor box) |
| ZS4000-2020 | EMC resolver connector for resolver cable (counterpart for motor box) |
| ZS4000-2021 | EMC encoder connector for encoder cable (counterpart for motor box) |
| ZS4000-2030 | EMC thermo-protective male connector (counterpart for thermo-protective wire), D-sub, 9-pin, with housing, straight, male |
| ZS4000-2040 | EMC power coupling for AL2000/AM2000, counterpart for motor cable ZK4000-21xx/-27xx |
| ZS4000-2050 | EMC resolver coupling for AM2000, counterpart for resolver cable ZK4000-22xx |
| ZS4000-2051 | EMC encoder coupling for AM2000, AM3000, counterpart for encoder cable ZK4000-26xx |
| ZS4000-2060 | resolver female socket, angled 90°, for AM2000 |
| ZS4000-2061 | encoder female socket, angled 90°, for AM2000 |
| ZS4000-2062 | resolver female encoder, rotatable, angled 90°, for AM3000 |
| ZS4000-2063 | encoder female encoder, rotatable, angled 90°, for AM3000 |
| ZS4000-2070 | power female socket, angled 90°, for AM2000 |
| ZS4000-2071 | power female socket, rotatable, angled 90°, for AM3000 |
| ZS4000-2080 | resolver female socket, straight, for AM2000 |
| ZS4000-2081 | encoder female socket, straight, for AM2000 |
| ZS4000-2090 | power female socket, straight, for AM2000 |
| ZS4000-2100 | metal flange for motor cable to adjust the connector, two parts with sealing |
| ZS4000-2101 | metal flange for feedback cable to adjust the connector, two parts with sealing |
Ballast resistors
| Ordering information | AX2090-BWyy-zzzz | Ballast resistors |
|---|---|
| AX2090-BW01-0250 | external ballast resistor for Servo Drive AX2003–AX2020 250 W/33 Ω |
| AX2090-BW02-0500 | external ballast resistor for Servo Drive AX2003–AX2020 500 W/33 Ω |
| AX2090-BW03-1500 | external ballast resistor for Servo Drive AX2003–AX2020 1500 W/33 Ω |
| AX2090-BW05-2000 | external ballast resistor for Servo Drive AX2040 2000 W/15 Ω |
| AX2090-BW05-3000 | external ballast resistor for Servo Drive AX2040 3000 W/15 Ω |
| AX2090-BW05-6000 | external ballast resistor for Servo Drive AX2040 6000 W/15 Ω |
| AX2090-BW06-2000 | external ballast resistor for Servo Drive AX2040 2000 W/10 Ω |
| AX2090-BW06-3000 | external ballast resistor for Servo Drive AX2040 3000 W/10 Ω |
| AX2090-BW06-6000 | external ballast resistor for Servo Drive AX2040 6000 W/10 Ω |
Motor choke
| Ordering information | AX2090-MD20 | Motor choke |
|---|---|
| AX2090-MD20 | motor choke for Servo Drive AX2003-AX2020 and AX25xx with motor cable > 25 m |
Mains chokes
| Ordering information | Mains chokes |
|---|---|
| AX2090-ND60-0000 | mains choke for Servo Drive AX2040, 60 A, without UL approval |
| AX2090-ND60-0001 | mains choke for Servo Drive AX2040, 60 A, with UL approval |
| AX2090-ND75-0000 | mains choke for Servo Drive AX2070, 75 A, without UL approval |
| AX2090-ND130-000z | mains choke for Servo Drive AX2040/AX2070, 75 A, without UL approval |
Mains filter
| Ordering information | Mains filter |
|---|---|
| AX2090-NF05-0042 | mains filter for Servo Drive AX2040, 42 A, without UL approval |
| AX2090-NF06-0075 | mains filter for Servo Drive AX2040, 75 A, without UL approval |
| AX2090-NF06-0130 | mains filter for Servo Drive AX2040/AX2070, 130 A, without UL approval |
I/O interface cards
| Ordering information | AX2090-IO01 | I/O interface cards |
|---|---|
| AX2090-IO01 | I/O interface card (14 inputs, 8 outputs) to start motion tasks |
Note: In the case of using the I/O-interface card the installation of a fieldbus interface is not possible.
Software
| Ordering information | AX2090-S003 | Software |
|---|---|
| AX2090-S003 | operator software for AX2000/AX2500, online documentation |