Accessories
Connectors
| Ordering information | Description | Pict. |
|---|---|---|
| ZS1090-0003 | EtherCAT/Ethernet RJ 45 connector, IP 20, 4-pin, for field-assembly | A |
| ZS1090-0005 | EtherCAT/Ethernet RJ 45 plug, IP 20, 8-pin, field assembly | B |
Cables
| Ordering information | Description |
|---|---|
| ZB9010 | Industrial Ethernet/EtherCAT cable, fixed installation, CAT 5e, 4 wires |
| ZB9020 | Industrial Ethernet/EtherCAT cable, drag chain suitable, CAT 5e, 4 wires |
| ZB903x | Industrial Ethernet/EtherCAT cable, reduced diameter for M8 wiring |
Fibre-optic cables for EK1501, EK1521
| Ordering information | Description |
|---|---|
| ZK1091-1001-0001 | fibre-optic duplex cable, SC connector, 1 m |
| ZK1091-1001-0005 | fibre-optic duplex cable, SC connector, 5 m |
| ZK1091-1001-0010 | fibre-optic duplex cable, SC connector, 10 m |
Further lengths and variants on request
Patch cable
The pre-assembled Ethernet/EtherCAT cables with RJ 45 plug enable fast, easy wiring inside the control cabinet and are suitable for short distances on the machine. The robust, industrial quality PUR cables distinguish themselves from office cables by both their mechanical and their EMC characteristics. Further lengths and variants on request.
| Technical data | ZK1090-9191-0001 | |||||||
|---|---|---|---|---|---|---|---|---|
| Cross-section | 4 x 2 x AWG26/7…4 x 2 x 0.128 mm² | |||||||
| Cable sheath material | PUR | |||||||
| Colour | green (RAL 6018) | |||||||
| Line configuration | SF/UTP | |||||||
| Diameter | sheath: typ. 5.9 mm ±0.2 mm | |||||||
| Bending radius | > 5 x diameter | |||||||
| Category/class | CAT5, class D | |||||||
| Operating/installation temp. | -40…+75 °C/-10…+60 °C | |||||||
| Insertion cycles | min. 750 | |||||||
| Ordering information | Cable |
|---|---|
| ZK1090-9191-0001 | Industrial Ethernet/EtherCAT patch cable, 0.17 m |
| ZK1090-9191-0002 | Industrial Ethernet/EtherCAT patch cable, 0.26 m |
| ZK1090-9191-0005 | Industrial Ethernet/EtherCAT patch cable, 0.5 m |
| ZK1090-9191-0010 | Industrial Ethernet/EtherCAT patch cable, 1.0 m |
| ZK1090-9191-0020 | Industrial Ethernet/EtherCAT patch cable, 2.0 m |
| ZK1090-9191-0030 | Industrial Ethernet/EtherCAT patch cable, 3.0 m |
| ZK1090-9191-0050 | Industrial Ethernet/EtherCAT patch cable, 5.0 m |
| ZK1090-9191-0100 | Industrial Ethernet/EtherCAT patch cable, 10.0 m |
| ZK1090-9191-0150 | Industrial Ethernet/EtherCAT patch cable, 15.0 m |
| ZK1090-9191-0200 | Industrial Ethernet/EtherCAT patch cable, 20.0 m |
| ZK1090-9191-0250 | Industrial Ethernet/EtherCAT patch cable, 25.0 m |
| ZK1090-9191-0300 | Industrial Ethernet/EtherCAT patch cable, 30.0 m |
| ZK1090-9191-0350 | Industrial Ethernet/EtherCAT patch cable, 35.0 m |
| ZK1090-9191-0400 | Industrial Ethernet/EtherCAT patch cable, 40.0 m |
| ZK1090-9191-0450 | Industrial Ethernet/EtherCAT patch cable, 45.0 m |
| ZK1090-9191-0500 | Industrial Ethernet/EtherCAT patch cable, 50.0 m |
Connectors for KS Bus Terminals, ES EtherCAT Terminals
| Ordering information | Description |
|---|---|
| ZS2010 | 10 connectors for KS and ES series, spare part (KS/ES terminals are supplied with connector.) |
Connectors for KM and EM modules
| Ordering information | Description |
|---|---|
| ZS2001-0001 | connector for KM or EM module, 1-pin, without LED; spare part (KM and EM terminals are supplied with connector.) |
| ZS2001-0002 | connector for KM or EM module, 1-pin, with LED; spare part (KM and EM terminals are supplied with connector.) |
| ZS2001-0004 | connector for KM or EM module, 3-pin, with LED; spare part (KM and EM terminals are supplied with connector.) |
| ZS2001-0005 | connector for KM module, 1-pin, without LED, labelling (1…10); spare part (KM and EM terminals are supplied with connector.) |
Shielding connection system
The shielding connection system enables the shielding to be located very close to the terminals of the shielded line, so that interference is reduced to a minimum. Two variants are available for the realisation of this function: a shield busbar for attachment to a mounting rail or a bracket for separate mounting in the control cabinet.
| Ordering information | Shield busbar with mounting rail holder | Pict. |
|---|---|---|
| ZB8500 | clamp strap for shield connection with knurled screw, width 11 mm, shield diameter max. 8 mm, packing unit = 10 |
A |
| ZB8510 | shield busbar 10 x 3 mm, 1000 mm galvanised Cu, packing unit = 1 |
B |
| ZB8520 | mounting rail holder for shield busbar (10 x 3 mm), packing unit = 2 |
C |
| ZB8530 | U-clamp terminal up to 4 mm² for PE connection to the rail (10 x 3 mm), packing unit = 20 |
|
| Ordering information | Shield busbar clamps | Pict. |
|---|---|---|
| ZB8500 | clamp strap for shield connection with knurled screw, width 11 mm, shield diameter max. 8 mm, packing unit = 10 |
A |
| ZB8511 | shield busbar clamp 10 x 3 mm for 5 Bus Terminals/EtherCAT Terminals 12 mm, packing unit = 10 | D |
| ZB8530 | U-clamp terminal up to 4 mm² for PE connection to the rail (10 x 3 mm), packing unit = 20 |
|
Assembly aids
| Ordering information | Description |
|---|---|
| ZB8700 | slot screwdriver assembly tool for pressing the spring force clamps on the Bus Coupler and the Bus Terminals |
Bus system housing
The BG1558 and BG1559 housings are especially suitable for the construction of compact I/O stations with a higher protection class (IP 65). The housings are supplied with mounting rails. If desired, the housings can be supplied fully fitted with EtherCAT Terminals, flanges and PG threaded fittings. Further sizes are available on request.
If desired, the housing can be supplied fully fitted with Bus Coupler, Bus Terminals, flanges and PG threaded fittings. Further sizes are available on request.
| Ordering information | Description | Pict. |
|---|---|---|
| BG1558 | bus system housing 400 mm x 200 mm x 120 mm (W x H x D) with mounting rail and holes | A |
| BG1559 | bus system housing 600 mm x 200 mm x 120 mm (W x H x D) with mounting rail and holes |
Marking material
The EtherCAT Terminals can be individually labelled with standard contact signs. The marking material is not included in the EtherCAT Terminal delivery.
Contact label overview
Slide-in label cover, transparent
The slide-in label covers BZ3200 enable clear labelling of the individual channels or text-based functional description of the EtherCAT Terminals. The labels are inserted in the designated slots. For connecting the individual channels the label cover can be tilted upwards.
| Ordering information | Description |
|---|---|
| BZ3200 | insertable label cover, transparent, pluggable, 11.5 mm x 104.5 mm, packing unit = 50 |
| BZ5100 | push-in strips for labels, A4 sheet, 160 pieces, pre-punched, packing unit = 10 |
Coding pins and sockets for KS and ES terminals
The coding pins and sockets for ZS2010 and KS/ES terminals with pluggable wiring level enable coding between terminal and plug in order to prevent incorrect plug insertion.
| Ordering information | Description |
|---|---|
| ZS2010-0010 | The set contains 100 sockets and 100 pins. |
Demokit
The TC9910-B11x EtherCAT demokit offers a quick introduction into EtherCAT communication. It includes EtherCAT Terminals and a Coupler for testing simple I/O functions. The enclosed CD contains a step-by-step guide and a full version of TwinCAT as programming environment for the Beckhoff EtherCAT master. EtherCAT slaves of any type can be tested with this field-proven EtherCAT master. It also includes a comprehensive help collection that facilitates familiarisation with Beckhoff ADS communication and programming according to IEC 61131.
The demokit consists of:
- EK1100 EtherCAT Coupler
- 2 digital input terminals 24 V DC
- 2 digital output terminals 24 V DC
- Beckhoff product folder
- Beckhoff TwinCAT CD
- “TwinCAT Quickstart“ documentation
- documentation describing the EK1100
- a 25 cm section of 35 mm mounting rail for fitting the terminal system
- TwinCAT PLC licence (only TC9910-B110)
- end cap
- Ethernet cable
| Ordering information | Description |
|---|---|
| TC9910-B110 | EtherCAT demokit, with TwinCAT PLC license |
| TC9910-B111 | EtherCAT demokit, without TwinCAT PLC license |