FC9001-0010, FC9011 | PCI Ethernet

The Ethernet PCI network cards can be used in office and automation networks and offer the following benefits:

• plug-and-play interface
• 10/100/1,000 Mbit/s (FC9011), 10/100 Mbit/s (FC9001-0010), full duplex
• automatic baud rate setting according to IEEE 802.3u
• maximum performance through hardware-integrated checksum creation and verification
• The hardware side supports Quality of Service (QoS) through prioritised multiple queues.
• Wake on LAN
• Boot from LAN (PXE) (only FC9011)

The cards (or individual channels) can also be operated with TwinCAT drivers – and therefore in real-time.

Technical data	FC9001-0010	FC9011
Fieldbus	all Ethernet (IEEE 802.3) based protocols
Number of Ethernet channels	1
Data transfer rates	10/100 Mbit/s, IEEE 802.3u auto-negotiation, full duplex at 10 and 100 Mbit/s	10/100/1,000 Mbit/s, IEEE 802.3ab auto-negotiation, full duplex at 10, 100 and 1,000 Mbit/s
Interface to the PC	plug-and-play PCI interface 32 bit
Ethernet interface	10BASE-T/100BASE-TX Ethernet	10BASE-T/100BASE-TX/1,000BASE-TX Ethernet
Ethernet plug	1 x RJ 45
Cable length	100 m (up to switch or end device)
Standard drivers	standard operating system drivers for Intel®-compatible NIC real-time driver or Beckhoff driver for Windows 2000/XP and Windows 7 (available from Beckhoff website)
Real-time drivers	TwinCAT drivers for EtherCAT/real-time Ethernet. Drivers can be selected separately for each channel.
Hardware diagnosis	2 LEDs per channel (activity, link)
Dimensions	approx. 51 mm x 120 mm
Operating temperature	0…+55 °C

Ordering information	FC9001-0010	FC9011-0000
FC90xx-00xx	standard configuration

Accessories
Cordsets	cordsets and connectors

System
Ethernet TCP/IP	For further Ethernet TCP/IP products please see the system overview.